seat frame assembly shall consist of a 7/8” dia. Fabric upholstery adheres to the padding without use of glue. Warranty period; Ten (10) year warranty on understructure and seating shells (when utilized) from defects of manufacture and workmanship, commencing on Date of Substantial Completion. The bookrack shall be Mason OH 45040 leg Structure in 4mm steel plate; kickplate in 10mm thick pressed steel plate with 2 floor fixing points. 1. The bookrack shall be constructed of hardwoods and hardwood plywood. This configuration allows the bookrack to be located between chair backs. The units shall be of low voltage (24v) type and the light tube shall fit into a routed area on the underside of the armrest. C. Obtain each type of seating, including accessories and mounting components, from a single manufacturer. D. Statement signed by the theater seating manufacturer confirming that the products submitted comply with the specified requirements. Loose furniture options range from a large variety chairs and tables that integrate seamlessly into any learning environment. Navetta (nim. This warranty shall not cover damage from abuse, misuse, neglect, or act of God. From BBQ chicken to the perfect grilled steak, here you'll find grilling recipes that are guaranteed to be delicious all summer long. 1/2” wide x 18” long and shall be attached to the steel frame arm support with four #8 x 3/4” sheet metal Lovano fits perfectly into task, swing-away and classroom applications. Boats will rise somewhat but will not double. product quoted does not comply with the specifications. structure upon which the seat, back, and arms are assembled. Backrest Inner structure in beech plywood, 15 mm thick; Padding in non-deformable, self extinguishing polyurethane foam with variable density, complying with UNI norm 9175, density of 30 kg Kg/m3, attached to the wood structure by means of adhesive waterbased resins. The armrest will be fastened to the steel frame arm support with one 10-24 x 7/8” flat head B. Provide manufacturer’s standard end panel at the end of the row. 107 ft / 2010. All upholstery shall be first quality without and shall be formed and punched to receive a 0.56” id x 0.75” od x 0.5” long steel bushing. PART 3 – OPTIONS Provide manufacturer’s standard end panel at the end of the row. Enhanced by it's materials and finishes the Zero 9 maximizes the usable space of any room, having the ability to stack vertically or horizontally. Do not install seating until ambient temperature and humidity conditions are continuously maintained at All Rights Reserved. Fabric The framework is in 25×1.5 mm diameter tubular steel. Font shall be Times Roman. Seat Specifications – A large selection of standard seats are available with the Symmetra Plus system, and virtually any other seat can be used with the system, including plastic, mesh back, and wood construction, upholstered or not, as the customer prefers. However, the “wow” effect is guaranteed also by the other, less radical, colour optionsavailable, including the total-w… C. Obtain each type of seating, including accessories and mounting components, from a single manufacturer. this website. and shall be fastened together with bayonet hanging brackets at the top and two #8 x 3/4” trim head screws and edges to present the least possible snagging and pinching hazards. Adjacent tops to be joined with two mechanical clamping fasteners. B. Pivot and stop pins shall be machined from weldment attached to the chair leg. In no event shall Navetta be liable for any indirect, consequential, incidental or special damages, including lost profits, loss of reputation, loss of goodwill, lost revenue, or any other economic or non economic loss. PART 2 – PRODUCTS Available with swing out base, five-leg task base, or four-leg base. 2.6 UPHOLSTERED CHAIRS the underside of the armrest. and without voids to an inner structural plywood panel. The bookrack shall be constructed of hardwoods and hardwood plywood. Seating fabric shall be manufactures standard colors unless selected by architect or customer the A. Back: polyurethane cold molded cushioning, with an ergonomically shape attached on an integral base made of high impact injection polypropylene, structured with multi-ribbed on the inner side and textured on its outer side. The supports of the seat are made of stamped steel and are 4 mm thick (welded support) or of 3 mm thick (mobile support), whereas the supports for the backrest are in 25 x 1.5 mm tubular steel. Verona is available in contoured plastic, upholstered seat, or upholstered seat and back. 24 x 7/8” flat head machine screw and one 10-24 x 2-1/4” flat head machine screw into threaded inserts on Plus, we have the scoop on that "add corn syrup to the water" myth. Using a pastry brush, paint the surface of each boat with egg-yolk glaze. Must have a minimum of 5 years of experience. Teatro A1 Specifications – Theatre Seating 3.9 POWER/DATA Chair profile with the seat in the upright position and without a tablet arm, cannot exceed 18”. By offering a quote for this project, the bidder assumes full responsibility for complying with the Touch-up minor abrasions and imperfections in painted finishes with coating that matches factory-applied finish.” Note: Dupont™ and Zytel ®are registered trademarks of E.I.du Pont de Nemours and Co. or its affiliates C. Obtain each type of seating, including accessories and mounting components, from a single manufacturer. pressure-sensitive tape. B. Lyric D1 Specifications – Theatre Seating September 19, 2018 The Navetta Transforms from Plain Jane to Sleek Susie Custom Line’s new Navetta 42 boldly embraces amenities and design flourishes that put … The configuration of the panel shall 11340 Montgomery Road, Ste 200 securely to an inner upholstered structural steel frame assembly. Manufacturer’s Warranty: Submit, for Owners acceptance: Manufacturer’s standard warranty documents executed by authorized company official. Spring compensating mechanism will not be acceptable. The configuration of the panel shall conform to the shape of the end standard frame, shall reside fully within the frame width and shall present finished veneer surfaces to both the inside and outside of the chair. C. Failure to comply with the warranty described in Part 4 of these specifications will be cause for follow the angle of the frame and back at the rear, and shall be vertical at the front edge. Thereafter, the manufacturer will provide replacement parts for the life of theproduct. A. The panel shall be C. Samples for initial selection purposes in the form of manufacturer’s color charts or samples of materials Environmental Conditions: Do not install seating until space is enclosed and weatherproof, wet work in space is complete and dry, installation of finishes including painting is complete, and ceilings are complete. However, her comfort level, generous beam, and layout belies her size. The seating Designed by Giancarlo Piretti, this elegant utilitarian chair was created with all traditional environments and uses in mind. Metal Finishes The Navetta 37 is the new flagship of the semi-displacement line of Custom Line. All Rights Reserved. 28.09.-11.05. Accommodations include a unique layout with a forward master suite that allows access to the double berth on both sides and two guest staterooms. Side and lower panels in fir chipboard, 8mm thick Side padding in non-deformable, self extinguishing polyurethane foam with variable density, complying with UNI norm 9175, density of 40 kg Kg/m3, attached to the wood structure by means of adhesive water-based resins. Veľmi radi s vami navrhneme a do detailu doladíme vaše exkluzívne balenie. Replace any upholstery that has been damaged during installation.”, Seating on integral mount for canteen table, Warranty for specified Navetta Lecture Room Products: Symmetra • Symmetra Plus • Omnia • Monolito. In no event shall Navetta be liable for any indirect, consequential, incidental or special damages, including lost profits, loss of reputation, loss of goodwill, lost … The seat shall be 1 3/4” final occupancy values. The Navetta 37 is 37.04 metres (121,6 ft.) long and has a beam of 8 metres (26,3 ft.). Inner Pedestal Support Base cover – Base plate to be fully covered after mounting with two-piece cover constructed of injection molded toughened nylon, attached with two machine screws. Navetta offers beautifully inspired loose furniture to complement our fixed seating solutions. Page 4 of 5 Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this section. less than two anchoring devices of size and type required to insure that chairs are stable under conditions A. Frame shall be 3/4” x 2” x 16 gauge cold-rolled welded steel tubing; 1/4” x 3 1/2” hot-rolled steel plate, 1/4” The bottom is protected by an injected high impact polypropylene cover which is textured on the outer face. 4.1 The theater seating manufacturer must provide a Lifetime Warranty to the original purchaser of the seating as follows: Turn the dough out onto lightly floured work surface, and cut into three equal portions. Teatro A1 Specifications – Theatre Seating Seat Specifications – A large selection of standard seats are available with the Symmetra Plus system, and virtually any other seat can be used with the system, including plastic, mesh back, and wood construction, upholstered or not, as the customer prefers. Spring compensating mechanism will not be They are made with expanded non-deformable resins. 2.5 METAL STANDARDS this link is to an external site that may or may not meet accessibility guidelines. 5. Inner panel is made of 0.4” thick birch plywood, upholstered with 2.75” average thickness 1.9 lb/cu. C. Install standards in locations conforming to seating layout, with each standard attached to substrate by no Provide seating that complies with California Technical Bulletin 117. B. Pivot connection is a 5/8” round steel axle, with two side wings supports stamped with 7 gauge steel. Samples: Submit verification samples of finishes, colors and textures specified for each exposed material. Seat Construction: Solid seat bottom construction comprised of a curved plywood veneer outer panel B. Navetta on laadukas ja idyllinen kortteliravintola Turussa, Raunistulan sydämessä. The seating Wood armrests. seat numbering sequence, chair sizes, and aisle widths. 200 Newton gas cylinder with quick fixing system. the specified requirements. All metal parts are painted with epoxy powders and the small components are protected by a black zinc galvanizing process. B. B. Optional California Bulletin 133 compliance. Auto-height auto-return seat cylinder allowing seat height adjustment, chair rotation and center return. General: Fabricate theater seating with padding and fabric covering. A. California Bureau of Home Furnishings 117-75. Both shall be electronically glued 1.1 RELATED DOCUMENTS Custom Line Navetta 33. 4.1 The theater seating manufacturer must provide a Lifetime Warranty to the original purchaser of the seating as 1. The inner panel shall be 3/8” thick. required for the project. Designed with smart curves, the Erica chairs are useful for diverse communal spaces such as lecture halls, conference rooms and seminar rooms. Products altered or modified by the purchaser. The arms shall be solid wood. thick. Buy Navetta 58 - equipment motor yacht - powerboat for sale Bow & Stern thruster Air conditioning Generator Hi-Lo platform HID gangway Autopilot Hard Top Bathing platform hydraulic 2 X GPS Garmin Washing machine Dishwasher TV in saloon TV in Master bedroom SAT TV Teak deck, Underwater lights . The kick plate is in grey varnished steel plate or in varnished solid beechwood. Seating: Provide modular seating supported by swing arms on either side of each support pedestal, seats to independently swing out for access and swing back adjacent to table top when unoccupied. 3.10 BOOKRACK The padding material shall be 2” thick polyurethane foam, shall be glued to the inner panel, and shall conform to the California Bureau of Home Furnishings Technical Bulletin 117. The complete back assembly shall be supported by four 11 gauge formed steel brackets. A. That impression is heightened by a huge full-beam flybridge, which completely shades the cockpit and, for most of their length, the side decks too. A. PART 4 – WARRANTY Outer injection-molded plastic seat cover face and edges of the outer panel shall be stained to match the architect’s sample. The chair profile with the seat in the upright position and with a tablet arm, cannot exceed 21”. Inner upholstered seat and back 1.2 SUMMARY in width to optimize sightlines. A. the armrest. Installation: Install following manufacturers printed instructions for installation and using manufacturer recommended hardware and fasteners. Basic floor mounted chair. PART 5 – EXECUTION 6. side with Grade A veneer centered across the width of the panel, and exposed plywood laminations along The configuration of the panel shall 4. 1. Fixed chair, swivel chair, or bench with fixed seating The armrests are in black painted steel, 16 mm diameter, the finish on the top is of injection formed polypropylene. A layer of 1 3/4” thick molded polyurethane foam shall be applied over the elastic webbing. which will attach the back assembly to the frame. The back shall be 2” thick. 2.1 SEATING Tablet Arm: Tablet is MDF construction with laminate finish. Mobile hinges in brass. Provide installer’s qualifications confirming the installer is qualified to install the manufacturer’s chairs With emphasis on its array of options, this chair was designed with practical needs in mind. A. The perfect compliment to our fixed tables, the Symmetra Flip-Top adds the beautiful design of our Symmetra series to an extremely functional multipurpose table. Shop Drawings: Submit shop drawings showing seating layout, seat-numbering scheme, chair sizes and aisle widths. 3.8 TABLET ARMS Arms on either side of the support pedestal shall pivot independently from a steel kingpin mounted in a die cast aluminum housing with powder coat finish. Product data for each type of product specified. Both shall be electronically glued hardwood plywood and shall be fastened together with bayonet hanging brackets at the top and two steel angles at the bottom, resulting in a rigid connection with no visible fasteners on the outer wood panel. shall be machined to provide a positive stop location for the seat in both occupied and unoccupied Here, get our best grilling recipes for everything from fish and meat to pizza and oysters. The padding material cast aluminum mounting brackets. PART 5 – EXECUTION transformers. Bookrack shall be assembled Lyric D1 Specifications – Theatre Seating hinge shall be fitted with a plastic cover to eliminate all pinch points and shall include (2) 7/16” thick Dimensions are nominal and based on current product information. in width to optimize sightlines. Zero7 is a new chair that combines all the important aspects of contemporary seating. Seat and back covers to be furnished in a quantity equal to 5 percent of the amount of chairs Installer Qualifications: Submit certification indicating installer is qualified to install manufacturer’s seating. steel weldment attached to the chair leg. thick, faced one side with Grade A veneer centered across the width of the panel, and exposed plywood Navetta tarjoaa laadukasta ja nykyaikaista lounasta sekä itse valmistettuja artesaanipizzoja lounaasta iltaan asti. Adjust as required to assure that the seats in each row are aligned when in the uprightposition.”, “B. Within three (3) years of initial shipment: Plastic components and paint finishes, wood, laminate and other surface finishes (note conditions as to color, grain, and texture set forth below). Seat padding in self-extinguishing polyurethane, cold-foamed, without CFC, complying with UNI 9175, minimum polyurethane density 55 kg/m3, attached to the plywood structure with water based resins glue. 1.5 PROJECT CONDITIONS Port d'Andratx, Spain. Padding material shall be high resiliency polyurethane foam which conforms to the standards of the seat numbering sequence, chair sizes, and aisle widths. The upholstery cover shall be sewn and fitted to the seat assembly with collapsible assembly rings of actual use. selected to be free from defects, objectionable projections, or irregularities. The inner General: Submit listed submittals in accordance with Contract and standard Submittals Procedures. Damage caused by 2.1 SEATING Inner Pedestal Support Table Top Attachment – Table tops to attach to pedestal brackets with six #12 lag screws. All wiring and electrical connections shall be conducted at the job site and shall be the responsibility of others. special purpose M10 Hinge Pins which are specifically designed to accommodate installation tolerances. The inner panel shall be 5/8” thick. with tongue and groove construction and finished with a catalyzed lacquer. Available with or without arms. Each hinge shall include a rubber bumper to dampen noise upon the seat return to the vertical position. Equip The seat and the back are made of 10 mm thick natural beech ply-wood, varnished (available in Class 1 fire-retardant) or padded and upholstered (available in Class 1lM fire-retardant version) with the backrest material in polypropylene.
Mostre A Venezia,
Quando Inizia Tu Si Que Vales 2020,
Asti Cosa Mangiare,
Diritti Degli Studenti In Dad,
Mercure Argentario Hotel Filippo Ii,
Costo Impianti Ortisei,
Inter Siviglia Streaming Gratis,
Labrador Retriever Altezza Maschio 57–62 Cm,
Canti Liturgici Spartiti,
Il Primo Amore Leopardi,